The product draws outside air into the respirator through a fan, goes through a pre-filter, UVA LED and main filter to remove toxic gases and particles in the air, and finally clean air is expelled through the air.
Product
structure
Respirator
size:φ 101mm×191mm
(diameter×height)
Waist bag
Polyester+PVC
Mask
Silikonkautschuk, E n g i –
n e r i n g p l a s t i c s
P o l y c a r b o n a t e
p i p e fi t i n g s
12 Monate Service Leben
Breathing tube
φ 2 2 m m h o s e, O n e
Ende ist verbunden mit
t h e m a s k C o n e c t
das andere Ende zum
Respirtor
Produkt
overview
① Connect one end of the breathing tube to the air outlet of the breathing tube
Host and the other end to the mask air inlet.
② Attach the hip bag to the hip belt and tie it at the waist.
③ Start the respirator, wear a mask, set the gear and place it in the
Bum bag.
Functional
wise
The product sucks outside air through a fan into the respirator, flows through a pre-filter, a UVA LED and a main filter in turn remove toxic gases and particles in the air and finally is clean air
sent out through the air outlet.
Filter
change
The pre-filter LED lights up and indicates that a new filter is required
Place the pre-filter. The user can buy a new one
Pre-filter to replace. Unscrew the base counterclockwise.
Take out the pre-filter and replace it with a new one. After the replacement is complete, press the reset button, the LED indicator will go out, and the usage time counter will reset again.
Then release the reset button and continue normal operation.
Main
filter
The main filter LED lights up, indicating that the main filter needs to be replaced. The user can –
Chase a new main filter to replace it. Unscrew the top cover, take out the main filter and reinsert it with a new one. After the exchange is complete,
Press the reset button, the replacement main filter, the LED light goes out and the timer for use goes out again to be reset, then release the reset button and continue normal operation.
Application
command
The product is suitable for medical personnel to wear during surgery and to provide users with fresh and clean air and to prevent the influence of pathogenic microorganisms, liquids, and particles.
Produkt
Parameters
Four-speed air
volume adjustment
60SLM
140SLM
210SLM
280SLM
AIR FLOW
（SLM:standard litre per
minute）
Battery
battery capacity：
3000mAH，12V，36WH
Battery runtime：
60SLM＞9h
140SLM＞8h
210SLM＞6h
280SLM＞4h
Battery charging
time: fully charged
2H,charged to 80%
capacity 1h
UVC-LED
Peak wavelength：
270-285nm
life span test：≥
10000h
E. coli 8099 killing
rate:99.999%
Staphylococcus
aureus kill rate：
99.999%
Filter
ULPA Filter;
Low pressure drop, highdust
collection efficiency;
Excellent chemical resistance;
Excellent resistance to
acids (such as hydrofluoricacid),
alkalis and organicsolvents;
Excellent moisture resistance;
Excellent water resistance;
Replaceable;
Product
Specifications
Pre-filter
Eliminate large particles and protect the main filter
① waterproof
② Little pressure drop
③ Interchangeable
Mainfilter
ULPA-Filter
① Low pressure drop, high dust collection efficiency
② Excellent moisture resistance
③ Excellent water resistance
④ Interchangeable
Battery
Power indicator 1 LED （Yellow）） Battery low, red light ；
Fan speed display 3 LED （Green）） Fan speed display ；
Pre-filter light 1 LED （Red）） Indicates that the pre-filter
needs to be replaced ;
Main filter light 1 LED （Red）） Indicates that the main filter
needs to be replaced ;
Mainbutton
2-in-1 button that is used as the power button and fan speed button
(Press for 5 seconds to turn on, 5 seconds to turn on
turn off)
Operating temperature -10 ～ ～ 50 ℃, humidity 5% ～ 95%